Gundam 00 Submission Thread

Xanadu · Post by **Xanadu** » Thu Nov 27, 2008 10:32 pm

Oh, my bad.

Also I found this pic to, not sure about the head but the leg parts look right.
http://img267.imageshack.us/img267/4855 ... 478xi1.jpg

Post by **Chris** » Thu Nov 27, 2008 11:23 pm

What does that picture have to do with anything? Please don't post in this thread unless you have something important to contribute to it.

Xanadu · Post by **Xanadu** » Thu Nov 27, 2008 11:26 pm

Chris wrote:What does that picture have to do with anything? Please don't post in this thread unless you have something important to contribute to it.

sorry, I ment to point out the gun thing it seems to have in that pic too

Red XIV · Post by **Red XIV** » Thu Nov 27, 2008 11:54 pm

That's the Overflag linear rifle. Not a GN beam rifle of any sort. There's no reason the GN Flag would be incapable of using an Overflag rifle, but there was also no reason for Graham to bring one along given that they're not strong enough to pierce the Gundams' armor.

I don't think the fact that a toy includes the rifle can be considered useful info for the profile. It was probably just something Bandai tossed in so the GN Flag figure wouldn't be so sparse on accessories.

plau · Post by **plau** » Wed Dec 03, 2008 5:41 am

I don't know if any of these line art are in better quality that the ones we already have, but some of them might be. I'm sure the Ptolemaios's is.

http://gundam00.bandai-ent.com/mechas/

Also the Model number for the Ptolemy is CBS-70 and the Ptolemy 2 is CBS-74.

http://gundam00.bandai-ent.com/gn000.php
Side Note: This is EPIC FAIL, but it does give us a nice line-art of 00.

Red Zaku · Post by **Red Zaku** » Thu Dec 04, 2008 4:23 pm

http://gundam00.bandai-ent.com/gn000.php
Side Note: This is EPIC FAIL, but it does give us a nice line-art of 00.

>.> Art we already have. I cleaned that up awhile ago when those images were put on Sunrise's season 2 verson of the Japanese site.

Also, I know we already have a picture of the Gadessa but here is the version from the official site.

http://img230.imageshack.us/img230/9268/gadessadg1.jpg

Red XIV · Post by **Red XIV** » Fri Dec 05, 2008 11:34 pm

plau · Post by **plau** » Sat Dec 06, 2008 2:31 am

Sharper Scan of Mr. Bushido's Ahead
http://img183.imageshack.us/img183/1328 ... 12kte7.jpg

asterphage · Post by **asterphage** » Sat Dec 06, 2008 5:02 am

Red XIV wrote:Kyrios' GN shield:
http://img.photobucket.com/albums/v298/ ... shield.jpg
Kyrios' GN shield in pincer mode:
http://img.photobucket.com/albums/v298/ ... pincer.jpg

Looks like the first one, the closed up shield, is the highly detailed art published with the 1/100 model kits, and the second, the opened pincer, is the anime art. We should keep this stuff sorted out.

OpMegs · Post by **OpMegs** » Mon Dec 08, 2008 4:38 am

The Tieren, Flag, and Enact can all be attributed to the UN Forces, as we see all three among Sergei's blockade in episode 10 of S2.

plau · Post by **plau** » Tue Dec 09, 2008 11:55 am

They fix 0 Gundam and have quite a nice line-art for it.
http://gundam00.bandai-ent.com/mechas/GN-000-0.gif

Also, the Official website updated with line-art of the GNZ-005 Garazzo.
http://www.gundam00.net/ms/img/15.png

And they also have line-art of the 0 Raizer/Raiser.
http://www.gundam00.net/ms/img/14.png

Homeless · Post by **Homeless** » Tue Dec 09, 2008 2:32 pm

While less than thrilling, the site also gave statistics for the Gadessa.

Overall height: 24.8m (Normal Mode), 21.4m (Ground Mode)
Base weight: 60.4t

Red XIV · Post by **Red XIV** » Tue Dec 09, 2008 4:39 pm

They also have stats for the 0 Raiser:

Overall length: 17.6m
Overall width: 11.2m
Height: 2.5m
Weight: 20.2t

Also, we can logically conclude that the 00 Raiser's weight is 75.1 metric tons (54.9 + 20.2).

Red Zaku · Post by **Red Zaku** » Tue Dec 09, 2008 11:43 pm

http://img117.imageshack.us/img117/1076/0gundamxu2.jpg
0 Gundam redone again.

http://img383.imageshack.us/img383/8531 ... zzozy0.jpg
GNZ-005 Garazzo

Red XIV · Post by **Red XIV** » Thu Dec 11, 2008 2:03 am

0 Raiser is armed with 2 GN beam machine guns, 4 GN vulcans, and 8 GN micro missiles. And sadly, Saji has been confirmed as the pilot.

Nightwing03 · Post by **Nightwing03** » Thu Dec 11, 2008 6:26 am

I'm not one to usually correct lineart but the pic of the Rasiel+GN Sefer's edges look a bit rough...

My clean up of the Rasiel docked with GN Sefer

Red XIV · Post by **Red XIV** » Tue Dec 16, 2008 8:59 pm

Here's my attempt at cleaning up the 0 Raiser lineart from the official site:
http://img.photobucket.com/albums/v298/ ... nr-010.jpg

I've never had much luck with cleaning up those pics, and this isn't much better than I usually manage. But it's better than nothing.

And here's some HRL mobile armors from 00F:

Xiaoshou:
http://img.photobucket.com/albums/v298/ ... aj-s08.jpg
Xiaoshou side view:
http://img.photobucket.com/albums/v298/ ... 8-side.jpg

Feimeng:
http://img.photobucket.com/albums/v298/ ... aj-p13.jpg
Feimeng side view:
http://img.photobucket.com/albums/v298/ ... 3-side.jpg
Feimeng AI-Controlled Type:
http://img.photobucket.com/albums/v298/ ... -p13ai.jpg

Jiachong side view:
http://img.photobucket.com/albums/v298/ ... 4-side.jpg

Name translations are courtesy of this post by Mark Simmons. The machines are pretty much what they look like: the Xiaoshou is a space-use mobile armor and the Feimeng is for aerial combat. Also, from what I can gather the Feimeng is armed with a single 20mm cannon, and the Xiaoshou with an 80mm x 50 smoothbore gun. The Jiachong (the tank-like land mobile armor) also has an 80mm x 50 smoothbore gun along with a machine gun of unknown caliber.

Also, this is probably too imprecise to be used in the profiles, but if we assume those measuring sticks in the side views are in 1-meter increments, then the Xiaoshou is approximately 8.6 meters tall, the Jiachong 7.4 meters long (including the main gun) and 3 meters tall, and the Feimeng 6.5 meters long and 1.9 meters tall.

Tieren Zhizhu elevator-climbing mode (not sure about the technical terminology, but whatever):
http://img.photobucket.com/albums/v298/ ... evator.jpg

EZero8 · Post by **EZero8** » Wed Dec 17, 2008 8:42 pm

Kataron/Katharon's Space Realdo:

http://i54.photobucket.com/albums/g101/ ... -space.png

Gelgoog Jager · Post by **Gelgoog Jager** » Thu Dec 18, 2008 3:36 pm

Here's a pic from HG Arios Gundam, listing its weapons and their location:

http://img.photobucket.com/albums/v287/ ... 8488t3.jpg

GN Twin Beam Rifle
GN Sub Machine Gun
GN Saber
GN Beam Shield
GN Vulcan

The lack of numbers for the weapons has left me with some doubts about their numbers:

In the case of the sub machine guns, I'm not sure if the set in each arm is considered a single gun or if they are 2 per arm for a total of 4.

Same goes for the beam shield, since the one marked is one of the two "claws" that make the nose, so they might be considered as two beam shields instead of one.

I'm almost certain that there is two vulcans. Although there isn't a pic focusing the outer section of the left claw, the top picture barely shows the lower part of that claw and it does seem to have the same square section of the vulcan.

For the time being I will not go as far as putting a number for each weapon.

Newtype87 · Post by **Newtype87** » Thu Dec 18, 2008 6:25 pm

Gelgoog JÃ¤ger wrote:Here's a pic from HG Arios Gundam, listing its weapons and their location:

http://img.photobucket.com/albums/v287/ ... 8488t3.jpg

GN Twin Beam Rifle
GN Sub Machine Gun
GN Saber
GN Beam Shield
GN Vulcan

The lack of numbers for the weapons has left me with some doubts about their numbers:

In the case of the sub machine guns, I'm not sure if the set in each arm is considered a single gun or if they are 2 per arm for a total of 4.

Same goes for the beam shield, since the one marked is one of the two "claws" that make the nose, so they might be considered as two beam shields instead of one.

I'm almost certain that there is two vulcans. Although there isn't a pic focusing the outer section of the left claw, the top picture barely shows the lower part of that claw and it does seem to have the same square section of the vulcan.

For the time being I will not go as far as putting a number for each weapon.

How about something like "2 x 2-barrel sub machine gun?"

And I know we can't see it, but I think it would be kinda weird if they didn't have a matching GN Vulcan on the other side, but I guess we'll have to wait for confirmation. And same thing for the beam shield: it just makes more sense to have two of them. I guess two beam sabers as well?

I'm sorry, is this more mecha discussion? Sorry.