Yes, i ordered many times from R10 using SAL. It takes about exactly 2 weeks for something like a small box (paints, markers, action bases) to arrive from japan to california, bay area in the US and I ordered a MG destiny and it took about 2 weeks and 2 days to arrive. I ordered 3 small packages and...

Will the weapon system from the 1/60 RD fit some what on the PG strike? I know it wont be tight, i just wonder if it fits some what.

Both the strike and the strike rouge comes with the grand slam sword.

How long do I have to wait for the tamiya TS synthetic enamel spray paint to dry or cure before I can apply top coat on it safely?

After that, how long does it take for top coat to dry and fully cure?

Thanks.

also, if you put top coat on before assembling, it gives you tighter joints so that it can hold its poses better, but sometimes, joints may not fit too well because of that. If you dont put top coat on before assembling, wont paint start to chip of later on even if you put top coat on after assembli...

i use grey for light parts like white and light grey in panel lining details. I see on a lot of pictures that people use black to panel line light parts. Black seems to contrast with light colors too much so i use grey. What is better on light color parts, black or grey lines? I like a cool soft loo...

don't think it can really hold anything properly when the GN blade/rifle is attached to exia. You can make it hold something, but it will be plain sloppy (like the GN blade will be out and weird swing on the side).

Gadget wrote: Strike PG have been over recycle. After the Strike, there came the Skygrasper. Then Strike Rouge with Skygrasper. Now, there is the Complete Stike, withe the Skygrasper.

There is a complete set with strike and sky grasper in PG? I only seen them sold separately.

I dont think there is a point unless you want it to be less shinny.

the problem with the lead based paint isnt really the swallowing the pieces whole, its more like touching it when it deteriorates and indigesting the paints that are chipped?

Well, im just going to spray a layer on paint striaght on the top coat layer first and try it, I hope it works!

EDIT: Dont do it, i just did it and luckily the paint was able to cure somewhat properly, but the extra layer looks bad as the top coat doesnt allow the paint to really stick on...

Model kits should say made in Japan which should be safe. Action figures are made in China usually and i dont know if its trustworthy yet.

Deus EpS Machina wrote:Yes you can.

really? I can just spray paint on the top coat later just like that? I though you need a special step, cool, i dont have to waste time on the other stuff.

I dont really know about the exact color, i know what you mean by the GN sword having different colors though. It looks like white on the edges in the anime, but its probably silver ( i mean it is a blade) and its grey in the middle. Are the edges white or silver? Does plated silver look good on the...

can i spray another layer of paint on top of a top coat layer? Im using tamiya TS-21 gold and Mr. Hobby Top Coat Gloss.

i just want a spray thats not too dark like you said, I dont plan to follow the color chart, I just want a shade of grey thats not dark, any suggestions?

What is a good tamiya TS grey that matches best with the color chart of the PG strike's inner frame?

Note: There is no plain "TS grey" , its like haze grey, german grey, etc. and i don't know which one mathces the grey for the color chart best for the strike's inner frame.

1> Sanding - I've made a post about this in another thread. There I asked if I have to keep sanding until all the scratch marks disappear, or if it was supposed to be that way and I have to apply some kind of wax or whatever. 2> I've read on some website that using Gundam Markers for panel lines ma...

how about the old method soap and water? Should I just peel off the sticker and rub the stuff off?

I messed up on stickers on my MG freedom and am planning to use water slide decals to replace them. How do I remove the stickers and clean the area so that I can place the water slide decals without air bubbles? The problem is that I've notice that after removing the clear stickers that there is a s...