Old Gundam profile corrections

Lineart, documentation and archive corrections can be submitted here.
Post Reply
User avatar
Kuruni
Der Bigen Slicen
Posts: 2650
Joined: Mon Mar 06, 2006 12:43 am
Location: sitting next to a cute loli
Contact:

Re: Old Gundam profile corrections

Post by Kuruni » Sun Oct 19, 2014 1:46 am

Not sure if it's mistake or source conflicting. But MS Encyclopedia call GF13-020NK "Gundam Zebra", not "Zebra Gundam". It also list its base weigth as 7.8 ton instead of our 7.5.
My girlfriend was a loli.

Darrien
Cardboard Leo Ace
Posts: 39
Joined: Tue Aug 01, 2006 10:34 pm

Re: Old Gundam profile corrections

Post by Darrien » Sat Jan 24, 2015 1:50 pm

The page for the SVMS-01AW Union Flag Orbit Package Astro Work Type features Cruise mode artwork from the SVMS-01AP Colony Guard type. This doesn't quite work though, as we can see by the lineart for the Astro Work that it doesn't feature the normal Flag hands, which the Cruise mode art has. Unless it can switch them out, this should probably be removed from the page.

User avatar
Kuruni
Der Bigen Slicen
Posts: 2650
Joined: Mon Mar 06, 2006 12:43 am
Location: sitting next to a cute loli
Contact:

Re: Old Gundam profile corrections

Post by Kuruni » Sun Nov 22, 2015 1:24 am

I'm not sure if it's error or source conflict, but there's few things about SPA-51 Cannon Illefuto (from Turn A Gundam).

1. While our profile state that it's 15 meters height, both Official Site and Gundam Info profile state that it's less than 15 meters (15m弱).
2. Both of them also call the back cannon as "small caliber gun", with Gundam Info's state that it's Gatling cannon.
3. Gundam Info's profile also note that it has single vulcan gun on its head.
My girlfriend was a loli.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Sat Nov 26, 2016 10:46 pm

Somethings i noticed about the new batch of Gundam 00 mecha profiles

1)Alvatore: Large Fangs mentioned twice, once under 'Fixed armaments' and again under 'Remote weapons'. Also the side beam cannons aren't mentioned in the page at all.

2)Empruss: There should be 4 x GN Beam Cannon instead of 2 x. There are two on top and two on the bottom as seen here. They also double as GN verniers.

3)Arche: The GN shield is incapable of scissor-like attack. It is just the shield's Beam shield, which is formed using GN Field, can be used offensively.

4)GN-X: The beam sabers are stored in the thighs, not the skirt armor. Also, the GN Long Barrel Beam rifle is just the GN Beam Rifle with additional parts.

5)GN-X III: The beam sabers are stored in the thighs, not the skirt armor. The GN Lance's rifle function is built in.

6)Ahead: The GN beam rifle is the GN Submachine gun with added parts.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Fri Dec 02, 2016 11:27 pm

Some more notes about the Gundam 00 profiles.

Sakigake: GN Beam Saber can also be mounted on either hips. The GN Beam saber is not really powered by the GN Shield's condenser. The condenser is simply for faster recharge.

Smultron: Missing GN Vulcan in the GN Shield, my fault for not mentioning it. GN beam rifle is the GN sub machine gun with added parts.

Susanowo: May want to change the enhanced sabers' beam oscillator to beam generator for easier understanding, just learnt about this recently.

Tieren All region type: shoulder shields are not officially acknowledged, they are just called movable shoulder armor and not listed as an armament. The armament section is missing the 200mm x 25 caliber smooth bore gun (the same weapon as used by the Tieren Space type). I don't think the suit used it in the anime, but the HG Kit and the official site has it as part of the suit's armament.

Garazzo: should be 2 x Beam Claw (10 x Beam Saber) as the beam claws is the collectively name when the 10 beam sabers are used simultaneously. The relevant part in the 'Technical and Historical Note' section should also be amended accordingly. Garazzo only has 2 GN Cutters on the forearms, none on the shoulders. Should include a mention of the protective visor that slides up to protect the suit’s eyes during combat.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Tue Dec 06, 2016 8:18 am

Things to note for the Gundam 00's HRL and Union's MS profiles:

Tieren Antiaircraft Cannon Ground Type: Should be just Tieren Antiaircraft Cannon Type, probably caused by a typo error i made.

Tieren Kyitwo:The 500mm multistep acceleration gun is actually mounted on the rear waist. See here

Tieren space type: carbon wire is an optional equipment mounted on the right chest

Tieren taozi: the shoulder shields are not officially acknowledged as such, they are usually known as movable shoulder armor and not listed as part of the suit's armament in the HG kit or the official site.

Flag Series: To be more accurate, the 20mm machine gun should be stated as being mounted on abdomen next to cockpit in the 'General and Technical Data' section.

Over Flag Astro Package: Just learnt that it has a pair of linear cannons on the waist, can be seen in the flight mode.

Shell Flag: Armament list is missing the leg missiles. Regarding the line 'The Shell Flag can adapt to various terrain by changing its parts....', it should be 'The Union Flag can ….' instead as the sentence is talking about the Union Flag in general.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Fri Dec 09, 2016 7:44 am

Some notes for the AEU MS:

Hellion Terrorist Custom: Forget to note that the missile launcher is known as large missile container

AEU Enact: Isn't the roll out date AD2307?

AEU Enact Sullie Palace Guard Type: Consider removing the link to the linear rifle lineart at the page's bottom as the suit's linear rifle looks closer to Ali's AEU Enact Custom's.

Ali's Enact Custom (both version) & Agrissa Type 13: only one large sonic blade on the MS, mounted on the left elbow.

Agrissa Type 7: There seems to be a problem with the 'Docked with Hellion Medium' picture, it just shows the front and rear view of the Agrissa unit without the Hellion.

Agrissa Type 13: About the plasma field generator, the following wording might be better: A disc-shaped plasma field generator is housed on the inner side of the Agrissa's six legs, and the plasma field generated targets an enemy pilot directly rather than their machine.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Sat Dec 17, 2016 5:33 am

Notes for the two recent batches of Gundam 00 MS profiles.

GN-X IV: Best to have the GN Shield as optional fixed armament. Not all GN-X IV uses it, while some carry two GN shields. It is unclear if Amy or Deborah ever said the suit's performance resembles a Gundam. For the 'Technical and Historical Notes' section, it may be good to note clearly that ELS GN X-IV either has hand integrated GN beam rifle (long or short) on one hand and hand generated GN beam saber on the other, or dual GN Bazookas as arms. See here.

GN-X IV Core Fighter Loaded type: Change GN Shield to optional fixed armament

Neo-Hed: the equipment and design features is copied from the forcing scout type and should be removed.

Brave (both version): The sider binders' wings do not function as defense rods, rather it is the side binder itself that can rotate and function as defense rods. This error might be caused by my wording… The arms folding backwards in the cruise position has nothing to do with transformation stability, they just revolutionised the entire transformation structure. For the Brave commander type, it is the side binders' GN cannons that have a higher caliber not the GN beam machine gun.

Raphael Gundam: It is the GN Bazookas with a low rate of fire, not the GN Big Cannons.

Seravee Gundam II: Consider changing "The Seravee Gundam II is powered by three GN Drive Taus, two of which are housed inside the GN Big Cannons." into "The Seravee Gundam II is powered by three GN Drive Taus, two of which are housed inside the GN Big Cannons (the legs) and the last in the suit's back." for better clarity.

Raphael Gundam Dominions and Sera: Best to leave the rollout and first deployment for both MS as blank since the 00V battlefield chapter did not state such information. Additionally for Sera, the GN Bazooka should be handheld weapons like Seravee Gundam II.

Dynames Repair: The pictures' name 'Standard version' and 'Equipped with GN Full Shield' should be changed to 'Equipped with GN Full Shield (open)' and 'Equipped with GN Full Shield (close)' as both pictures depicted the suit with GN Full Shield.

Gadelaza: Its combat capabilities is equivalent to five teams of MS, not a five suit team. Probably bad wording on my part again. For the large GN Fangs, their longer operating time and higher attack power is due to them being powered by a GN Drive Tau each.

00 Qan[T]: Armament list is missing the GN beam gun mounted on the back of the shield. The part about the quantum system needs some rewording such as "The suit's Quantum Sustem make use of Setsuna's Innovator abilities and is designed for the dialogue. When the system is deployed, the twin GN Drive are linked and the suit’s body will glow. High density GN particles beyond the level of the Trans-Am Burst are released, which linked the consciousness of individual within the affected area, allowing dialogue to commence. The system's maximum output mode is the Quantum Burst, whereby there is additional events including purging of the suit’s armor, all the GN Condensers are exposed and the GN Sword Bits are positioned in a circular manner around the suit, releasing even more GN particles.'

00 Qan[T] Full Saber: Armament list is missing the GN beam gun mounted on the back of the shield. The 0 Rasier is not created to stabilize Gundam 00's GN Drives, that function is added onto the support fighter later. Hence, why i wrote 'Unlike the 0 Raiser that was forced to be used primarily for combining with 00 Gundam to help stabilize the Twin Drive system, the GN Sword IV Full Saber was developed for this purpose from the get go, and was hence designed as a weapon'.

00 Gundam Seven Sword/G Inspection: It features improved GN Condensers that could possibly power the Twin Drive System. At that point in time, GN condensers for Twin Drive System is still a work in progress.

User avatar
Kuruni
Der Bigen Slicen
Posts: 2650
Joined: Mon Mar 06, 2006 12:43 am
Location: sitting next to a cute loli
Contact:

Re: Old Gundam profile corrections

Post by Kuruni » Fri Mar 03, 2017 3:47 am

The offiical site classify Febral as Newtype-use MS (ニュータイプ専用モビルスーツ), not armor.
My girlfriend was a loli.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Sat Jun 03, 2017 12:13 am

About the ReZEL (Commander Type) and ReZEL Type C (GR), I know the official website only mentioned that the thrust limiter is disabled in the latter's profile and not in the former's.

Interestingly, the HG and MG model kit manual for the ReZEL (Commander Type) noted that its thrust limiter is also disabled, and its frame is also reinforced to restore the ReZEL's original performance. So it seems the only difference between the two mobile suits is simply the color scheme.

In light of this, the 'standard model' mentioned in the ReZEL Type C (GR)'s official website profile likely refers to the normal ReZEL and not the ReZEL (Commander Type). The 'standard model' was also used in the HG and MG model kit manual for the ReZEL (Commander Type) to refer to the normal ReZEL.

User avatar
Kuruni
Der Bigen Slicen
Posts: 2650
Joined: Mon Mar 06, 2006 12:43 am
Location: sitting next to a cute loli
Contact:

Re: Old Gundam profile corrections

Post by Kuruni » Wed Jun 14, 2017 4:34 am

Surprise...I did some research on Nether Gundam and found that on Nether Gundam's official profile. the pilot's name is ルトガー・バーホーベン. Not Paul.

It's appear that his name come from Rutger Hauer and lastname of Paul Verhoeven. But mistake happen somewhere so instead of "Rutger Verhoeven" we end up listing actual Paul Verhoeven with his lastname in romanji.
My girlfriend was a loli.

E08
Mysterious Masked Dude
Posts: 566
Joined: Tue Jul 19, 2011 8:00 am

Re: Old Gundam profile corrections

Post by E08 » Sun Jul 09, 2017 4:40 am

Discovered some wrong placement of images in the IBO series' mobile workers.

The 200mm warhead and multi-use launcher images in TK-56 Tekkadan Mobile Worker page actually belongs to the SAU-17 SAU Mobile Worker.

The ammunition image in UW-33 Union Mobile Worker belongs to the Union New Mobile Worker.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests